Milsom Industrial Designs Limited  
t: 01225 444 809  f: 01225 444 787  
 
 
 
 
Directions
 
To view a map of your route, please click here.
 
 
From Bristol...

  1. Follow the A4 from Bristol towards Bath.
  2. After driving through Saltford, you will come to a roundabout with the Globe Public House on your right.
  3. Take the first exit on your left, sign posted for Bath.
  4. Just before the end of the dual carriageway, take the first turning on your left sign posted for Weston/Newbridge. Continue over the bridge, leaving the Park & Ride on your left.
  5. Continue straight ahead through 2 sets of traffic lights.
  6. Stay in the left hand lane, heading towards another set of traffic lights. Continue straight along this road, past a row of shops on your left.
  7. At the end of this row of shops, and before you reach Victoria Park (on your left) you will see the entrance to Kelso Place on your right (with blue gates).
  8. Drive through the gates and through the car park to the end of the buildings where you will see the Milsom building on your right.

 
From the M4 Motorway...

  1. Leave the M4 motorway at Junction 18 and follow the A46 towards Bath
  2. On the approach to Bath, continue in the straight-ahead lane.
  3. At Cleveland Place, you will notice signs for the Bath Royal United Hospital (RUH).
  4. Follow these signs, passing the prominent Royal York Hotel on your left (Travelodge)
  5. Continue straight ahead into Queens Square, and past the Francis Hotel on the left.
  6. Continue following Bath RUH signs and Bristol (A4), around to the third side of the square,
  7. Leaving the square, you will see Victoria Park on your right, and the Hop Pole Public House on your left followed by the Westhall Public House.
  8. Make an immediate left turn into Kelso Place through the big blue gates.
  9. Drive through the car park to the end of the buildings where you will see the Milsom building on your right.